SDS Training Costs

Take advantage of the Drag Drop page builder, Visual Elements and Theme Options
we integrated so you can build the best site for your business.

OVERVIEW WEB & UI DEVELOPMENT BENEFITS PACKAGES TESTIMONIALS

Create powefull websites without any coding knowledge at all

The easy to use Visual Composer allows you to create seamless designs. The Theme Options interface provide just the correct settings to change the design and functionality of the theme based on your needs.

COURSE TITLE: SDS Remote Training w/Inventor Prerequisite – Physical Design

Course Cost: $8,000 USD

COURSE DESCRIPTION: Remote instructor-led environment consisting of up to 32 hours of training with up to 6 attendees. Schedule for the training is flexible but must be provided in a minimum of 2-hour web training sessions each and completed within sixty calendar days. Students will have access to the SDS Physical Design eLearning site for a one-year term with the option to renew at the end of the term.

The training covers the topics below:

Remote Web Training Sessions 1-4:

Inventor Topics as required for SDS Physical Design Training

Remote Web Training Sessions 5-8:

Strategic Modeling and Working with Large Assemblies

Remote Web Training Sessions 9-12:

Introduction to Substation Design Suite™ for Inventor, Above Grade Tools and Below Grade Tools for Buried Cable Routing and Flex Cable Routing

Remote Web Training Sessions 13-16:

Advanced Substation Design Suite™ for Inventor, Substation Design Content Editor, Design Checks and Substation Output

COURSE PREREQUISITES: Each student is also required to purchase eLearning training material.

SOFTWARE PREREQUISITES: Autodesk Inventor or Inventor Professional Software and the Substation Design Suite ™ Physical Design plug-in

HARDWARE PREREQUISITES: The SDS Physical Design plug-in requires the same hardware specifications as Autodesk Inventor. Autodesk Inventor hardware specifications are shown at the following webpage:

https://knowledge.autodesk.com/support/inventor- products/troubleshooting/caas/sfdcarticles/sfdcarticles/System-requirements-for-Autodesk-Inventor- Products.html.

In addition to the list above, 32 GB of RAM (memory) and a Solid-State disk drive is recommended.

COURSE TITLE: SDS Onsite Training w/Inventor Prerequisite – Physical Design

Course Cost: $8,995 USD + travel expenses billed at actuals.

COURSE DESCRIPTION: Onsite instructor-led environment consisting of four (4) days of training with up to 8 attendees. Students will have access to the SDS Physical Design eLearning site and material for a one-year term with the option to renew at the end of the term.

The training covers the topics below:

Training Sessions 1-4:

Inventor Topics as required for SDS Physical Design Training

Training Sessions 5-8:

Strategic Modeling and Working with Large Assemblies

Training Sessions 9-12:

Introduction to Substation Design Suite™ for Inventor, Above Grade Tools and Below Grade Tools for Buried Cable Routing and Flex Cable Routing

Training Sessions 13-16:

Advanced Substation Design Suite™ for Inventor, Substation Design Content Editor, Design Checks and Substation Output

COURSE PREREQUISITES: Each student is also required to purchase eLearning training material.

SOFTWARE PREREQUISITES: Autodesk Inventor or Inventor Professional Software and the Substation Design Suite ™ Physical Design plug-in

https://knowledge.autodesk.com/support/inventor- products/troubleshooting/caas/sfdcarticles/sfdcarticles/System-requirements-for-Autodesk-Inventor- Products.html.

In addition to the list above, 32 GB of RAM (memory) and a Solid-State disk drive is recommended.

COURSE TITLE: SDS eLearning Self-Paced Training – Physical Design

Course Cost: $395 USD per unique user for a one-year access term subscription

DESCRIPTION: The eLearning, self-paced web environment training consists of 12 sessions that includes both instruction, lab exercises, and appropriate lab exercise data. A user will have access to the eLearning site for a one-year term with the option to renew at the end of the term.

eLearning Web Training Sessions 1-4:

Strategic Modeling and Working with Large Assemblies

eLearning Web Training Sessions 5-8:

Introduction to Substation Design Suite™ for Inventor, Above Grade Tools and Below Grade Tools for Buried Cable Routing and Flex Cable Routing

eLearning Web Training Sessions 9-12:

Advanced Substation Design Suite™ for Inventor, Substation Design Content Editor, Design Checks and Substation Output

COURSE PREREQUISITES: Students participating in this training should have taken the Autodesk Inventor Intro to Solid Modeling course.

SOFTWARE PREREQUISITES: Autodesk Inventor or Inventor Professional Software and the Substation Design Suite ™ Physical Design plug-in

https://knowledge.autodesk.com/support/inventor- products/troubleshooting/caas/sfdcarticles/sfdcarticles/System-requirements-for-Autodesk-Inventor- Products.html

COURSE TITLE: SDS Remote Training – Electrical Design

Course Cost: $8,000 USD

COURSE DESCRIPTION: Remote instructor-led environment consisting of up to 32 hours of training with up to 6 attendees. Schedule for the training is flexible, but must be provided in a minimum of 2-hour web training sessions and completed within sixty calendar days. The training covers the topics below:

Remote Web Training Sessions 1-4:

Basic Workflow, Project Basics and Schematic Wiring

Remote Web Training Sessions 5-8:

Schematic Components and Schematic Editing

Remote Web Training Sessions 9-12:

Project-wide Editing, Schematic Reports and Wiring Diagram Cables

Remote Web Training Sessions 13-16:

Panel Layouts, Settings and Configurations and Automation Tools

COURSE PREREQUISITES: None

SOFTWARE PREREQUISITES: AutoCAD Electrical and Substation Design Suite ™ Protection & Control

HARDWARE PREREQUISITES: The SDS Electrical Design plug-in requires the same hardware specifications as AutoCAD Electrical. AutoCAD Electrical hardware specifications are shown at the following webpage:

https://knowledge.autodesk.com/support/autocad- electrical/troubleshooting/caas/sfdcarticles/sfdcarticles/System-requirements-for-AutoCAD-Electrical.html

In addition to the list above, a Solid-State disk drive is recommended.

COURSE TITLE: SDS Onsite Training – Electrical Design

Course Cost: $8,995 USD + travel expenses billed at actuals.

COURSE DESCRIPTION: Onsite instructor-led environment consisting of 4 days of training with up to 8 attendees. The training covers the topics below:

Training Sessions 1-4:

Basic Workflow, Project Basics and Schematic Wiring

Training Sessions 5-8:

Schematic Components and Schematic Editing

Training Sessions 9-12:

Project-wide Editing, Schematic Reports and Wiring Diagram Cables

Training Sessions 13-16:

Panel Layouts, Settings and Configurations and Automation Tools

COURSE PREREQUISITES: None

SOFTWARE PREREQUISITES: AutoCAD Electrical and Substation Design Suite ™ Protection & Control

https://knowledge.autodesk.com/support/autocad- electrical/troubleshooting/caas/sfdcarticles/sfdcarticles/System-requirements-for-AutoCAD-Electrical.html

In addition to the list above, a Solid-State disk drive is recommended.

COURSE TITLE: SDS Remote Project Mentoring – Physical Design

Mentoring Cost: $7,800 USD

DESCRIPTION: SBS Consulting personnel will work collaboratively with customer’s substation design personnel towards the goal of developing an SDS Physical substation design project. SBS will provide up to 40 hours of consulting services over a three (3)-month period toward the establishment of Substation design capabilities. These 40 mentoring hours typically consists of twenty (20) 2-hours sessions conducted twice per week.

PREREQUISITES: Students participating in this training should have taken the Autodesk Inventor Intro to Solid Modeling course and the SDS Physical Design Training.

SOFTWARE PREREQUISITES: Autodesk Inventor or Inventor Professional Software and the Substation Design Suite™ Physical Design plug-in.

https://knowledge.autodesk.com/support/inventor- products/troubleshooting/caas/sfdcarticles/sfdcarticles/System-requirements-for-Autodesk-Inventor- Products.html.

In addition to the list above, 32 GB of RAM (memory) and a Solid-State disk drive is recommended.

COURSE TITLE: SDS Remote Project Mentoring – Electrical Design

Mentoring Cost: $7,800 USD

DESCRIPTION: SBS Consulting personnel will work collaboratively with customer’s substation design personnel towards the goal of developing an SDS Electrical substation design project. SBS will provide up to 40 hours of consulting services over a three (3)-month period toward the establishment of Substation design capabilities. These 40 mentoring hours typically consists of twenty (20) 2-hours sessions conducted twice per week. Depending upon the scope of the project, more mentoring hours may be needed.

PREREQUISITES: Students participating in this training should have taken the SDS Protection & Control Design Training.

SOFTWARE PREREQUISITES: AutoCAD Electrical and the Substation Design Suite™ Protection & Control Design plug-in.

https://knowledge.autodesk.com/support/autocad- electrical/troubleshooting/caas/sfdcarticles/sfdcarticles/System-requirements-for-AutoCAD-Electrical.html

In addition to the list above, a Solid-State disk drive is recommended.

Social Links